NEWS CENTER

/
/
/
Causes of prestress remaining on the galvanized square pipe

Causes of prestress remaining on the galvanized square pipe

  • Categories:Steel knowledge
  • Author:
  • Origin:
  • Time of issue:2020-10-10 10:14
  • Views:

(Summary description)After any workpiece is mechanically processed, there will be residual prestress on the surface. The residual compressive stress on the hot-dip galvanized rectangular tube can improve its wear resistan

Causes of prestress remaining on the galvanized square pipe

(Summary description)After any workpiece is mechanically processed, there will be residual prestress on the surface. The residual compressive stress on the hot-dip galvanized rectangular tube can improve its wear resistan

  • Categories:Steel knowledge
  • Author:
  • Origin:
  • Time of issue:2020-10-10 10:14
  • Views:
Information

After any workpiece is mechanically processed, there will be residual prestress on the surface. The residual compressive stress on the hot-dip galvanized rectangular tube can improve its wear resistance and the fatigue of the tensile stress. The residual tensile stress on the square tube is actually the opposite of the compressive stress. Next, let me introduce to you the reason for the residual prestress on the galvanized rectangular tube.

The residual stress caused by deformation caused by cold plasticity. When the galvanized rectangular tube is processed, due to the cutting force, the processed surface of the square tube is deformed by strong cold plasticity. The most prominent cause of this cold plastic deformation is the tool: The upper knife faces the plastic deformation caused by the extrusion and friction of the surface of the square tube, because the base metal of the square tube is in an elastic state at this time. After the cutting force disappears, the metal of the base body tends to recover. At this time, the galvanized rectangular tube has been restricted by the surface of the shaping, causing the base body to not recover its original shape, so that it will remain on the surface. Under stress, the residual stress on it will cause its wear resistance and fatigue strength to decrease.

Scan the QR code to read on your phone

Recommended Products

JIS G3445 STKM11A/12A/13A COLD ROLLED PRECISION STEEL TUBE
Mechanical tube 标准 Standard: JIS G3445   用途 Application: 适用于机械制造,汽车制造,自行车制造,家具制作以及其他机械的零部件制造。 It is widely used in manufacturing of Machinery, Automobile, bycycle, furniture and some other machined parts. 主要牌号 Steel Tube Grade:   STKM 11A, STKM12(A,BC),STKM13(A,B,C),STKM14(A,B,C)   化学成分 Chemical Composition   钢级 Standard 牌号 Grade 化学成分Chemical Composition C Si Mn P S JIS G3445 STKM11A ≤0.12 ≤0.35 ≤0.60 ≤0.040 ≤0.040 STKM12A ≤0.20 ≤0.35 ≤0.60 ≤0.040 ≤0.040 STKM12B STKM12C STKM13A ≤0.25 ≤0.35 0.30-0.90 ≤0.040 ≤0.040 STKM13B STKM13C STKM14A ≤0.30 ≤0.35 0.30-1.00 ≤0.040 ≤0.040 STKM14B STKM14C   机械性能 Mechanical Properties   钢级 Standard 牌号 Grade 机械性能Mechanical Properties 抗拉强度(Mpa) 屈服强度(Mpa) 伸长率(%) Tensile Strength Yield Strength Elongation JIS G3445 STKM11A ≥295 / ≥35 STKM12A ≥345 ≥175 ≥35 STKM12B ≥390 ≥275 ≥35 STKM12C ≥470 ≥355 ≥25 STKM13A ≥375 ≥215 ≥30 STKM13B ≥440 ≥305 ≥20 STKM13C ≥510 ≥380 ≥15 STKM14A ≥410 ≥245 ≥25 STKM14B ≥500 ≥355 ≥15 STKM14C ≥550 ≥410 ≥15  
More 白箭头 黑箭头
42CrMo4 precision seamless steel tube for auto parts
42CrMo4 precision seamless steel tube for auto parts   chemical composition:   Carbon C  0.38~0.45% Silicon Si  0.17~0.37% Manganese Mn  0.50~0.80% Sulfur S  Allow residual content ≤0.035% Phosphorus P  allowable residual content ≤0.035% Chromium Cr  0.90~1.20% Nickel Ni  allowable residual content ≤0.30% Copper Cu  allowable residual content ≤0.30% Mo  0.15~0.25%     Mechanical properties: Hardness: Annealing, 255~207HB, indentation diameter 3.8~4.2mm; Quenching, ≥60HRC cr12mov The hardenability, hardness, strength and toughness after quenching and tempering are higher than CR12, and the work with a diameter of 300-400mm or less can be completed Hardenable, small quenching deformation, but poor high temperature plasticity. cr12mov plates are mostly used to manufacture composite molds and tools with large cross-sections, complex shapes and heavy workloads.  
More 白箭头 黑箭头
Mild Steel TUBE STKM11A /STKM13 A
Mechanical tube Standard: JIS G3445 Application: It is widely used in manufacturing of Machinery, Automobile, bycycle, furniture and some other machined parts. Steel Tube Grade: STKM 11A, STKM12(A,BC),STKM13(A,B,C),STKM14(A,B,C) Chemical Composition
More 白箭头 黑箭头
GB/T8162/8163 HOT ROLLED SEAMLESS STEEL PIPE
GB/T8162/8163 HOT ROLLED SEAMLESS STEEL PIPE
More 白箭头 黑箭头

There is currently no information to display
Please add data record on website background.

Shandong Liaocheng Yuanhetai Steel Co., Ltd. |   鲁ICP备20028590号-1  |  Powered by www.300.cn